Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Kitchen Remodeling: The Miami Gardens Owner’s Guide
Unilock kitchen remodeling in Miami Gardens runs $16,520 to $53,100 installed, and the range depends mostly on cabinetry linear feet, countertop material, and whether the layout changes. Unilock is a hardscape and wall-system brand, so in a kitchen its materials show up as paver-style flooring, wall veneer, and outdoor-kitchen surfaces tied to a remodel rather than as the cabinets themselves. Barrett & Sons Construction Miami Gardens installs these Unilock-compatible kitchen projects and coordinates the cabinetry, countertops, and layout work that goes with them.
Owners usually discover a problem the same way: a grout joint at the floor perimeter opens up after a wet season, a paver face spalls near the sink, or the wall veneer behind the range starts to sound hollow under a knuckle. In Miami Gardens, the afternoon storms and the humidity that hangs around after them speed up every one of those failures. You notice it on a Saturday morning, and then you can’t stop noticing it.
Key Takeaways
- Unilock kitchen work in Miami Gardens lands between $16,520 and $53,100 installed.
- Unilock is a hardscape brand; the kitchen-facing parts are flooring, veneer, and outdoor-kitchen surfaces.
- Spalling, hollow veneer, and open perimeter joints are the failures we see most after the rainy season.
- We’re an independent contractor, not affiliated with Unilock, and we pull permits on every eligible Miami Gardens job.
- Written line-item estimates, written change orders, and the 90-Day Done Right Promise on the finished work.
Which Unilock Models This Applies To
Unilock makes several product families, and the right replacement or matching piece depends on which one you have. The lines most often tied to interior and covered outdoor kitchen work are the paver series (Brussels Block, Beacon Hill, Umbriano, Treo, and the Estate Wall line), the wall and veneer systems (Rivercrest, Ledgestone, and the U-Cara retaining-wall blocks), and the outdoor kitchen and countertop pieces Unilock sells through its outdoor-living lineup. Each series has its own nominal thickness and face dimensions, and those numbers don’t cross over as neatly as a homeowner expects. A 60mm paver from one series won’t sit flush against a 70mm piece from another without a mortar bed adjustment, and the color lots shift between production runs.
To identify what you have, look first at the original packaging label if you kept it, then at a spare piece stored in the garage or under the lanai. Measure face length, width, and thickness with a tape, and photograph the texture and color under daylight. If there’s no label, an edge chip or cut-off piece will show you the aggregate and the finish. On the brand question: Unilock parts come from Unilock dealers and distributors, and matching an existing series is usually a matter of ordering the current version of that line. A quality aftermarket paver can work for a hidden repair, but for a visible surface the color and texture won’t blend. For the cabinets and counters in the same kitchen, we also work with KraftMaid, Cambria, and Silestone, which keeps the whole project in brands you can look up.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Kitchen Remodeling Is Failing
- Spalling or flaking on paver faces near the sink or dishwasher. Water sits where the finish wears thin, and a freeze-free climate doesn’t mean a dry one. Miami Gardens humidity works on those joints year-round, and a paver that sheds its top layer is telling you the sealer is long gone.
- Hollow sound behind wall veneer or a backsplash of stacked stone. A hollow thud usually means the bond has broken loose from the substrate. In kitchens, steam from the range and moisture from the sink are the usual culprits.
- Open joints at the floor perimeter or where the paver meets the cabinet toe kick. Movement at the room’s edges, not the middle, is the classic sign that the subfloor or the transition detail gave up.
- Lippage between two pavers or two veneer pieces. A lip of more than about 1/16 inch catches a toe and tells you the base wasn’t set right, or that the pieces are from different thickness lots.
- Efflorescence or a white haze that keeps returning. That’s salt migrating out of the mortar or the masonry, and it comes back because moisture is still getting in somewhere.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what the work runs in Miami Gardens, installed. Each figure is parts plus labor, permits where they apply, and cleanup.
| Scope | Installed Range |
|---|---|
| Full kitchen remodel (Unilock flooring and veneer combined with cabinets and counters) | $16,520 – $53,100 |
| Small kitchen remodel | $10,620 – $23,600 |
| Cabinet installation | $4,720 – $15,340 |
| Countertop installation | $2,360 – $7,670 |
| Backsplash installation | $945 – $2,950 |
| Kitchen island installation | $3,540 – $11,800 |
What moves the number: square footage of paver flooring, whether the veneer comes down to bare substrate, whether cabinets or the island shift, and the material line you choose. We itemize parts and labor on the estimate so you can see both. Every price change gets a written change order before work happens, and the finished job carries the written 90-Day Done Right Promise. If the demo uncovers a subfloor that needs repair, that’s a change order, not a surprise invoice at the end. Our crew members have up to 28 years of experience, and every eligible Miami Gardens job gets permits pulled and inspections signed.
DIY or Call Us?
An owner can safely reseal a paver floor, clean efflorescence with the right product, and re-caulk a perimeter joint. Those are weekend jobs. What we don’t recommend tackling yourself: pulling veneer off a wall to check the substrate, resetting a paver that’s bedded in mortar, or chasing a hollow backsplash section without knowing what’s behind it. Behind that stone could be drywall, cement board, or an older substrate, and cutting or prying blind near outlets and plumbing is where DIY goes wrong. Setting a heavy countertop or island in place takes two people plus the right support, and a kitchen floor that’s out of level will telegraph into every cabinet above it. Nobody should be guessing at that with a five-figure project on the line.
If you’re not sure whether you’re looking at a reseal or a reset, that’s the moment to call. Reach us at (844) 797-8316 and we’ll talk through what you’re seeing, then set up a free estimate. We’re an independent Miami Gardens contractor, not affiliated with Unilock.
FAQs
A properly installed and sealed Unilock paver floor should last 25 to 30 years or more, and exterior-grade wall veneer has a similar service life, though the sealer needs refreshing every few years in this climate. The failure isn’t the stone; it’s the sealer, the substrate, and the joint work. Miami Gardens heat and humidity are hard on all three. Call (844) 797-8316 for an honest read on yours; estimates are free.
Often yes. A localized area of spalling or a few loose pieces can usually be lifted, re-bedded, and blended back with matching stock. Replacement makes more sense when the damage is spread across the room or the substrate underneath is failing. We’ll tell you which one you’re looking at before you spend a dollar on material. Call (844) 797-8316 to schedule the free estimate.
A single-room paver floor reset or a veneer repair typically runs 3 to 7 working days once materials are on site, and a full kitchen remodel runs several weeks. Special-order Unilock series pieces add lead time depending on the line and color. We give you a written schedule with the estimate, and if a lead time moves, you hear it from us and it’s in writing. Call (844) 797-8316 to talk timing.
We identify the series from the label, a spare piece, or a physical sample, then order through Unilock dealers and distributors so the part matches your existing line. When a series has been discontinued, we tell you up front and walk through blend options, including hidden-repair aftermarket pieces or a border detail that hides the transition. Everything gets written on the estimate before we order. Call (844) 797-8316 for pricing on your Miami Gardens project; estimates are free.
Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.