Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Windows & Doors: The Miami Gardens Owner’s Guide
If you have a Unilock window or door that’s fogged, hard to open, or letting water past the frame, we install Unilock-compatible replacement units and hardware in Miami Gardens at installed prices of $5,310 – $17,700 for standard window replacement and $9,440 – $29,500 for impact-rated units. Whether we can match your exact model depends on the series plate on the sash, so a quick photo of the label is the fastest way to know. Miami Gardens owners usually find the problem the same way: a bedroom that won’t cool, a sliding door that needs both hands, or a rain stain on the drywall under a window during a June downpour.
Which Unilock Models This Applies To
Unilock has sold residential windows and doors in South Florida across several product lines – single-hung and double-hung vinyl, horizontal sliders, and impact-rated units built to Miami-Dade and Broward county code. The exact series a house got depends on when it was built or last re-glazed. Instead of guessing from the glass, we identify the unit by its label: a small etched plate or sticker in the upper corner of the sash or the frame head, listing the model, the glass type, and the impact rating when it has one. If the label is gone, the head jamb measurement and the frame depth do the job.
The OEM-versus-aftermarket question is real with Unilock. Factory parts are the safest fit for anything with a structural warranty still living, and we’ll tell you straight when a manufacturer part is the only honest answer. For glass sealed units and most hardware, quality aftermarket equivalents fit cleanly and cost less. One gotcha we run into constantly in Miami Gardens: an older Unilock slider whose track profile differs slightly from the current replacement sash, which means the unit will not slide into the old frame without a re-set. That’s the difference between a one-hour swap and a half-day job, and it’s the reason we ask for photos before quoting.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Unilock Windows & Doors Is Failing
- Fog or condensation between the panes. The sealed unit’s spacer has failed and moisture has gotten inside; the glass itself is fine but the seal is gone, so the whole glazed panel needs swapping.
- Hard to open or close, or a slider that jumps the track. Worn rollers, a bent track, or a sash that’s pulled out of square – usually the rollers first, sometimes both.
- Water stains on the interior wall or sill after heavy rain. The perimeter sealant has broken down or the weep holes in the frame are clogged, which is a Florida problem every wet season.
- Drafts, or a window that won’t latch tight. The weatherstripping has flattened or the lock hardware has loosened and drifted out of alignment.
- Cracks in the glass or a fogged impact unit. On impact-rated Unilock units, a compromised interlayer means the unit is no longer doing its job in a storm and has to come out.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Window replacement in Miami Gardens runs $5,310 – $17,700 for standard units and $9,440 – $29,500 for impact window installation, depending on size, glass type, and whether the frame is re-set. Here’s roughly how the money splits:
- Single standard window, glass only or sash swap: $5,310 – $17,700 installed, at the lower end for a small slider, the higher end for a large picture or multi-lite unit.
- Impact-rated window, full unit: $9,440 – $29,500 installed, higher for full-frame replacement and code-required anchoring.
- Hardware-only repair (rollers, locks, weatherstrip): quoted per window after we see the model – often far less than a full swap.
- Permits: impact-window replacement in Miami-Dade typically needs a permit and inspection, which we pull and schedule as part of the job.
The range moves with glass type, impact rating, frame condition, and how many units are done in one visit. We quote line items in writing and issue a change order before anything changes; every completed job carries our 90-Day Done Right Promise. We’re an independent service provider, not affiliated with Unilock.
DIY or Call Us?
Some of this you can safely check yourself. Confirm the label on the sash, measure the head jamb, clean the weep holes, tighten a loose lock, and note whether the fogging is between the panes or on the room side – that tells us seal versus condensation. Where DIY goes wrong: impact glass and full-unit swaps involve heavy glazing, code-required anchoring, and, in Miami Gardens, a permit and inspection. Prying a sealed unit out of a frame without the right tools cracks the glass or pulls the frame out of square, and a bad seal lets the next storm in. There’s nothing heroic about a two-story sash swap on a ladder. Call (844) 797-8316 and we’ll get you a written estimate.
FAQs
How long do Unilock windows and doors last in Florida? A sealed unit typically holds its seal 10 – 15 years in South Florida heat and humidity, while the frame and hardware can run longer with care. Salt air and afternoon storms shorten the seal’s life, which is why we see more fogged glass here than in cooler climates. Call (844) 797-8316 for an exact quote – estimates are free.
Can a failing Unilock window be repaired instead of replaced? Often yes. A fogged sealed unit, worn rollers, a loose lock, or dried weatherstripping can be fixed without a new window, and we’ll tell you honestly when repair beats replacement. If the frame is water-damaged or out of square, replacement is usually the better spend. Call (844) 797-8316 for a free second opinion on your written estimate.
How long does the swap take? A single window or hardware repair is usually a one-day visit; a full-house window replacement typically takes a few days, depending on unit count and whether the frames are re-set. We give you a schedule in writing before we start. Call (844) 797-8316 to lock in an estimate.
How do you source the Unilock part? We identify your model from the sash label or a measurement, then order the correct OEM part or a quality aftermarket equivalent from our suppliers – we don’t carry parts and don’t claim to stock them. Every part is confirmed against your specific unit before it’s ordered. Call (844) 797-8316 and we’ll get it matched.
Whether you’re in Miami Gardens dealing with a single fogged window or a whole house of tired sliders, the first step is a written estimate with every line item and allowance on paper. Call (844) 797-8316 to schedule your free estimate – a live person answers 24 hours a day, and the Senior & Veteran 10% discount is permanent. If a second opinion would help, we’ll review any written estimate for free, and inside the county there’s no trip charge. Proudly serving local communities for over 29 years, Barrett & Sons Construction Miami Gardens pulls the permits, signs the inspections, and stands behind the work.
Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.