Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Miami Gardens Homeowners Choose Therma-Tru Construction
Barrett & Sons Construction Miami Gardens provides independent Therma-Tru construction service across Miami Gardens – fiberglass and steel entry doors, sidelites, and multi-point locking hardware. What makes our Therma-Tru work different is that we know how these doors actually age in South Florida heat, humidity, and salt air, and we’ll tell you honestly when a door can be saved instead of sold. We’re an independent local provider, not affiliated with or authorized by Therma-Tru. If you’re looking at a sticking door, a spongy bottom rail, or a deadbolt that won’t throw, call (844) 797-8316.
Miami Gardens is a majority-Black, post-1960s suburb where most housing went up between 1960 and 1990. That means the work here is dominated by mid-century CBS block homes needing retrofits, not new high-rise construction like neighboring Miami or Miami Beach. Entry doors on these homes have been through decades of hurricane seasons, and it shows. We navigate a city with its own building department and strict post-Andrew code enforcement that often differs from Miami-Dade County’s standards, so nothing gets skipped.
Why Trust Barrett & Sons Construction Miami Gardens for Your Therma-Tru Construction?
Our technicians have up to 28 years of experience, and they’ve spent a lot of that time on Therma-Tru door systems. They know the Smooth-Star and Fiber-Classic lines by feel: where the skin meets the bottom rail, how a Classic-Craft mortise lock behaves after a wet summer, which weatherstrip profile matches which frame extrusion. That familiarity is why we can source OEM-compatible parts instead of forcing an aftermarket seal that almost fits.
Warranty-safe service matters to us. When the door slab and frame are sound, we use OEM Therma-Tru replacement seals, sweeps, hinges, and lock hardware so the original finish and structure stay intact. We document what we replaced and why, in writing, so there’s a paper trail if a warranty question ever comes up.
Every eligible job gets permits pulled and inspections signed. Every scope change gets a written change order before a tool touches the door. And every completed job is backed by the 90-Day Done Right Promise – if it’s not right, Tom comes back and makes it right. Tom publishes his name, address, and license number, so you can look it up before you sign anything. Calls are answered by a live person, 24/7, not a voicemail box.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Therma-Tru Construction Problems We Fix in Miami Gardens
These are the failures we see most often on Therma-Tru doors in Miami Gardens, and what’s usually behind each one:
- Smooth-Star and Fiber-Classic bottom-rail delamination. Fiberglass skins blister or hairline-crack at the bottom rail when water wicks behind the threshold and sits in the slab. By the time you see the crack, the pan flashing has usually been feeding moisture into the rail for years.
- Classic-Craft hardware drift. Multi-point and mortise lock hardware drifts out of alignment after Miami Gardens’ seasonal humidity swings. The deadbolt drags, or the handle won’t throw all the way. It’s not always the lock – it’s often the frame moving with the moisture.
- Fiber-Classic Oak finish breakdown. Factory-applied stains and paint chalk and peel on south- and west-facing elevations under this city’s UV load. The sun side of a west-facing entry can go chalky within a handful of seasons.
- Weatherstrip, sweep, and corner-seal failure. These flatten and shrink, letting wind-driven rain past the door and into the jamb. Miami Gardens sits in a high-velocity hurricane zone, so failed seals are a water problem and a wind problem at once.
- Threshold rot on older CBS homes. On 1960s and 1970s concrete block construction, the sill and threshold framing is the weak point. Original installs often lacked proper pan flashing, so rot travels quietly on the inside.
Therma-Tru Parts & Our Repair-vs-Replace Approach
OEM Therma-Tru seals, sweeps, and hinges match the original profile. Aftermarket weatherstrip rarely does, and a seal that doesn’t match the frame extrusion leaks. That’s why we use OEM wherever the door slab and frame are sound. We source parts per job – we don’t claim local stock – and we tell you up front how long a part will take to come in.
Our repair-vs-replace call is honest. When the slab is saturated, delaminated, or the frame is rotted at the threshold, a new Therma-Tru system is the right answer. Patching a failed bottom rail buys a year at most. When the structure is solid, a seal and hardware refresh costs a fraction of replacement and keeps your door. Here’s how a typical job usually goes: a homeowner notices the entry door sticking in summer and a soft spot at the bottom corner. Pulling the interior trim reveals the threshold pan flashing was never lapped correctly, so water has been feeding the bottom rail for years. A qualified local pro tests the slab for delamination, checks the jamb for rot, replaces the failed weatherstrip and threshold with OEM Therma-Tru parts if the door is sound, and otherwise sets a new prehung Therma-Tru unit with proper pan flashing and sealant so the same failure doesn’t repeat. Call (844) 797-8316 to schedule a free estimate.
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We test the slab for delamination, check the jamb and threshold for rot, and verify the hardware alignment against the frame. On Classic-Craft doors, we check whether the drift is hardware or frame movement.
- 2
Repair or install. We replace OEM seals and hardware on sound doors, or set a new prehung Therma-Tru unit with correct pan flashing and sealant where the slab is failed.
- 3
Test. We operate the deadbolt, handle, and multi-point system through a full cycle, check the seal line for gaps, and confirm the door swings without binding.
- 4
Warranty and sign-off. We document the parts replaced and the work done in writing, and back the job with the 90-Day Done Right Promise. Permits are pulled and inspections signed on every eligible job.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Miami Gardens
We service and install the Therma-Tru Smooth-Star fiberglass entry door line, the Classic-Craft American Style collection, Fiber-Classic and Fiber-Classic Oak doors, and the Benchmark and fire-rated door lines. That covers single and sidelite entry systems, multi-point and mortise hardware, thresholds, sweeps, and weatherstrip. We also handle the retrofit side that Miami Gardens CBS homes so often need: reflashing and resealing a failed threshold, correcting a jamb that’s pulling away, and resetting hardware after the frame has moved. If you’re not sure which line you have, send us a photo of the door edge and the hardware, and we’ll identify it before we come out.
We Also Service These Brands
We’re not a single-brand shop. We also work with KraftMaid cabinetry, Cambria and Silestone countertops, and Kohler fixtures, and we carry premium brands across every trade we touch – GAF and CertainTeed on roofs, Andersen and Marvin on windows, Belgard and Techo-Bloc on hardscapes. That matters when a door project turns into a full entry remodel. You get materials you can look up, not mystery brands off a van.
FAQs – Therma-Tru Construction Service in Miami Gardens
No. We’re an independent local provider, not affiliated with or authorized by Therma-Tru. We work on their doors every week and know the product lines well, but we don’t speak for the manufacturer and won’t claim to. Call (844) 797-8316 if you want an honest read on your door.
Yes, we use OEM Therma-Tru replacement seals, sweeps, hinges, and lock hardware wherever the door slab and frame are sound. Aftermarket weatherstrip rarely matches the profile and leaks, so we don’t default to it. Parts are sourced per job, so we’ll tell you the lead time up front.
A seal and hardware refresh is usually a short, single-visit job. A full prehung unit replacement takes longer, and permit and inspection timing in Miami Gardens factors in. We give you a written estimate with the scope before any work starts, so you know what to expect.
We cover the Smooth-Star fiberglass entry line, Classic-Craft American Style, Fiber-Classic and Fiber-Classic Oak, and the Benchmark and fire-rated door lines. That includes sidelites, multi-point and mortise hardware, thresholds, sweeps, and weatherstrip.
Not when it’s done right. We use OEM parts on sound doors, document what we replaced and why, and follow the install specs so the original finish and structure stay intact. We don’t claim to administer the manufacturer’s warranty, but we keep the paper trail clean.
It depends on the scope. Here are our standing ranges for the related work we do in Miami Gardens:
| Service | Price Range |
|---|---|
| Full Kitchen Remodeling | $16,520 – $53,100 |
| Full Bathroom Remodeling | $10,620 – $33,040 |
| Roof Replacement & Installation | $9,440 – $23,600 |
| Roof Repair | $470 – $2,125 |
Door service and entry-system work get a written, line-item estimate after we diagnose the door. Call (844) 797-8316 for an exact quote – estimates are free.
Book Your Therma-Tru Service in Miami Gardens, FL
If your Therma-Tru door is sticking, leaking, or showing a soft bottom rail, get it looked at before the next storm season. Call (844) 797-8316 to schedule your free estimate. We’re owner-operated, every eligible job gets permits pulled and inspections signed, every price change is a written change order, and every job is backed by the 90-Day Done Right Promise. Live person answers the phone, 24/7.
Written by the team at Barrett & Sons Construction Miami Gardens.