Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Construction in South Miami, FL | Barrett & Sons Construction Miami Gardens
We provide independent CGI service across South Miami, and here’s the one thing that makes our work here different: we install and detail CGI impact window, door and shutter systems inside a flood hazard zone where the ground water sits close enough to grade that a window-wall change can pull an elevation certificate and a dewatering plan onto the job before framing starts. That’s not true two miles west in Coral Gables. It’s routine in 33143. Barrett & Sons Construction Miami Gardens is an independent contractor, not affiliated with or authorized by CGI, and we work to the Florida Building Code, not a manufacturer banner. Our crew members have up to 28 years of experience. Call (844) 797-8316 for a free estimate.
Why South Miami Residents Choose Us for CGI Service
We handle CGI service every week: impact-rated aluminum windows and doors, hurricane shutter and panel products for older openings, and impact sliding glass doors sized for the rear patios that come with 1950s and ’60s South Miami ranches. We know these assemblies because we pull them, inspect the rough opening behind them, and reset them.
Parts matter. Hardware, gaskets and glazing get matched to the original unit specification wherever it’s still available, so the assembly keeps the wind-borne debris rating it was built for. Generic aftermarket seals are a stopgap, and we’ll tell you so.
Every eligible job includes permits pulled and inspections signed. Every scope, every allowance and every price change arrives as a written change order before work starts. And every completed job carries the same written 90-Day Done Right Promise. You can ask anyone on your street, or look up the license number yourself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CGI Construction Problems We Solve in South Miami
Most of what we fix on CGI units in South Miami comes down to five failures, and nearly all of them trace back to sun, salt air, block walls, or rain hitting a joint that was never lapped right.
- Seal and gasket degradation on impact units. Years of UV exposure and salt-laden air break down the perimeter seals and gaskets. It shows up as fogging between the panes or water intrusion at the sill, usually after a hard summer storm rather than out of nowhere.
- Anchor and fastener corrosion. On original ranch homes, CGI frames were sometimes set into single-wythe concrete-block walls without proper shimming or isolation between the aluminum and the masonry. Those fasteners corrode, and the frame starts moving in the opening.
- Out-of-square openings. Aging block walls move. A CGI frame that was plumb the day it went in can end up racked, and a racked frame gives you a sash that won’t glide, weatherstripping that won’t seal, and a drafty room.
- Improper flashing at stucco transitions. This is the chronic one. Where the CGI frame meets stucco, a joint that was never lapped correctly becomes a leak point. Hurricane-season wind-driven rain finds every one of those joints, and South Miami gets plenty of it from June through November.
- Impact sliding door track wear on rear patios. The patio doors common on South Miami ranches take direct sun on the south and west exposures. Tracks fill with grit, rollers flat-spot, and the door starts dragging or failing to latch fully.
CGI Service in South Miami: What Local Conditions Mean for Your Equipment
Here’s the local fact worth knowing before you touch any opening on your house: South Miami sits in a special flood hazard area with a high water table. On the flat, low-lying lots east of US-1 and around the Dadeland South Metrorail station, a crew can hit groundwater within a few feet of grade. So a window-wall change or a small addition that would be a straightforward stucco patch in Pinecrest can require an elevation certificate and a dewatering plan here before the first pour. That’s the difference, and it doesn’t show up on a generic contractor’s estimate.
It matters for CGI work specifically because the detail at the sill is where the leak always starts. A chronically damp wall from the water table up, combined with a flashing lap that was skipped, is why so many South Miami impact units fail at the bottom corner instead of the glass.
Here’s how one of these usually goes. On a typical 1950s – 60s concrete-block ranch in 33143, an owner notices fogging between the panes of an older CGI impact unit and water staining at the interior sill after a summer storm. The cause is usually a failed perimeter seal plus flashing that was never lapped correctly where the frame meets the stucco, and the high water table keeps the sill sitting in a damp wall. A qualified local pro pulls the unit, checks the rough opening and block for corrosion or cracking, re-flashes and re-seals to the Florida Building Code, and resets or replaces the CGI frame with correct shims and fasteners.
CGI Models & Products We Service in South Miami
We work on CGI impact-rated aluminum window and door systems used in South Florida wind-borne debris region construction, CGI Series hurricane shutter and panel products built for the openings on older ranch homes, and CGI impact sliding glass door units for rear patios. We service the frames, hardware, rollers, tracks, gaskets and glazing on those units.
Parts are sourced per job against the original unit’s specification, then matched to the model and rating of what’s actually in your wall. We don’t claim to stock CGI parts locally. Anything that has to be ordered, we tell you the lead time up front in the written scope, and you approve it before we order.
See the difference
Before
After
Before
After
Before
AfterCGI Service Pricing in South Miami
What you’ll spend on CGI-related work in South Miami depends on the sub-service, the number of openings, whether the rough opening needs repair, and whether your property’s flood zone status triggers an elevation certificate. Here’s what we typically quote:
| Service | Typical Range |
|---|---|
| Impact Window Installation | $9,440 – $29,500 |
| Window Replacement | $5,310 – $17,700 |
| Home Addition | $53,100 – $153,400 |
| Roof Replacement | $9,440 – $23,600 |
Every estimate is a written, line-item quote with the scope and allowances spelled out. If a price changes during the job, you get a written change order first. The estimate itself is free, and we’ll give you a free second opinion on any written estimate you already have. Call (844) 797-8316.
Serving South Miami, FL – Our Local Coverage Area
We serve South Miami and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CGI Construction in South Miami
Sometimes, yes. Because South Miami sits in a special flood hazard area with a high water table, an opening change or addition can trigger an elevation certificate requirement that wouldn’t apply in neighboring Coral Gables or Pinecrest. We check your property’s zone status before quoting, so you know the answer before work starts. Call (844) 797-8316 for a free estimate.
Yes, and it’s most of what we do on original South Miami ranch homes. The key is the rough opening: the block has to be sound, the frame has to be shimmed and isolated so it doesn’t corrode against the masonry, and the flashing at the stucco has to be lapped correctly. Retrofit is routine when the opening is prepped properly.
Nearly always a failed perimeter seal or flashing that was never lapped right where the frame meets the stucco, made worse by the chronically damp wall the high water table leaves in South Miami. Wind-driven rain during hurricane season finds that joint. A re-flash and re-seal to the Florida Building Code fixes it when the frame is still sound. Call (844) 797-8316 to have it looked at.
If the frame itself is corroded or the block opening around it is cracking, replacement is usually the honest answer, and we’ll say so. Chasing a new seal on a failing frame just moves the leak to next season. Where the frame is sound and only the gaskets or hardware have gone, we repair and match parts to the original spec.
Yes, in nearly every case, and the work falls under both Miami-Dade County and City of South Miami codes depending on where your property sits. We pull the permits and get the inspections signed on every eligible job. You shouldn’t have to find out at resale that your last contractor told you permits were optional.
Service Areas Near South Miami
We serve South Miami and the neighborhoods around it, including South Miami service area work throughout 33143, and we cover Coral Terrace and Olympia Heights on the same schedule. Out west and north we also serve Miami Gardens, Opa-locka, Country Club, Miami Lakes, Hialeah and Hialeah Gardens. There’s no trip charge inside the county.
Book Your CGI Service in South Miami Today
If you’re seeing fogging, a dragging sliding door, or water at the sill, get it looked at before the next storm season. We’ll give you a written, line-item estimate, spell out the scope, and pull the permits. A live person answers the phone, day or night. Call (844) 797-8316 for a free estimate.
Written by the team at Barrett & Sons Construction Miami Gardens.