A Barrett company - serving Miami Gardens, FL

Moen Home Additions & ADU in Miami Gardens, FL

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Moen Home Additions & ADU: The Miami Gardens Owner’s Guide

If you’re planning a Moen-fixture home addition or ADU in Miami Gardens, the honest answer is that Moen doesn’t make additions or ADUs – it makes the fixtures, valve trim and shower components that go inside them, and those come from a different trade than the structure itself. A finished residential addition in Miami Gardens typically runs $53,100 – $153,400, an ADU $106,200 – $259,600, and a garage conversion $35,400 – $94,400; Moen’s contribution is the plumbing trim, rough-in valves, drains and finish hardware that get specified during design and installed at rough-in and finish stages. We don’t promise same-day work on this – an addition is a permit-and-inspection job, not a repair call. Owners usually find the Moen part problem the same way: a new shower valve starts dripping six weeks after the tile goes up, or the trim plate they bought doesn’t cover the hole the old one left, and suddenly the finish schedule is the bottleneck.

Call (844) 797-8316

Which Moen Models This Applies To

Moen’s residential catalog splits cleanly for addition work: Posi-Temp and M-CORE rough-in valves (the M-CORE line is the newer plastic-bodied universal system, Posi-Temp the brass 1222/1225 cartridge standard), Moentrol pressure-balance valves on older stock, and the trim series that mates to each – Voss, Genta, Doux, Gibson, Align and the Eva and Method families for kitchen and bath. Compatibility matters more than people expect. A Genta trim won’t fit a Posi-Temp rough-in, and an M-CORE valve needs its own cartridge and trim line or the escutcheon won’t seat. Identify what you have by pulling the existing trim plate – the rough-in model is usually stamped on the plaster guard or the valve body face – then measure the valve center to the finished wall; Moen escutcheons cover roughly 6-inch openings, so a valve buried too deep or proud too far exposes a gap no trim covers.

On OEM versus aftermarket: the genuinely hard-failing Moen part is the cartridge (1222, 1225, 1200, M-CORE). A genuine Moen cartridge costs more than a knockoff and is worth it – aftermarket 1222 clones are notorious for early failures and incorrect flow restrictors in Florida’s hard municipal water. For cosmetic trim, a quality aftermarket escutcheon is usually fine. On the addition side, non-Moen brands we also work with include KraftMaid, Cambria and Silestone – worth naming because those trades and the plumbing rough-in have to land on the same schedule or you’re cutting drywall twice. Barrett & Sons Construction Miami Gardens is an independent service provider and is not affiliated with Moen.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Moen Home Additions & ADU Is Failing

  • Drip at the spout with the handle off. The cartridge seat is passing – usually the 1222 or 1225 hot/cold seat O-rings giving up before the cartridge itself. Common in Miami Gardens where sediment from aging municipal laterals abrades the seat faster than Moen’s design spec anticipates.
  • Handle sticks or won’t rotate smoothly. The balancing spool or the cartridge barrel has mineral scale; hard water plus Florida’s heat swings can lock a Posi-Temp handle in a partial-open position and cause scald risk.
  • Trim plate won’t cover the opening. Rough-in depth was set wrong during framing – the valve is either too shallow or too deep for the escutcheon. Shows up as a visible gap after tile, and it’s a tear-open fix, not a patch.
  • M-CORE cartridge housing cracked. The plastic M-CORE body will crack if the installer used the wrong wrench or over-torqued at rough-in. Small hairline on the housing becomes a wall leak behind the tile.
  • New ADU shower won’t maintain temperature when a second fixture opens. The pressure-balance valve was specified wrong for the shared supply, or the balancing spool is stuck. Common in Miami Gardens garage conversions where a single-line supply serves two new bathrooms.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Installed pricing in Miami Gardens breaks down by scope. A single Moen cartridge swap runs at the low end of a bath repair; full trim and rough-in replacement is priced inside the bathroom remodel line, which runs $10,620 – $33,040 for a small to mid bath, and a walk-in shower install with Moen trim falls in $5,310 – $14,160. What drives the range: whether the valve body is replaced or just the cartridge, whether tile has to come open to reach the rough-in (the biggest swing), and whether the trim is OEM Moen or a non-Moen brand. Every estimate from us is written line-item – parts, labor, rough-in, finish – and any change gets a written change order before the wall opens. Backed by our written 90-Day Done Right Promise.

DIY or Call Us?

Some of this you can check safely. Opening the trim plate to read the rough-in model, replacing a 1222 cartridge on a Posi-Temp valve, and re-caulking an escutcheon are reasonable homeowner jobs – Moen’s instructions are clear and the water shutoff makes it low-risk. Where DIY goes wrong: replacing a rough-in valve body in an addition wall means opening drywall or tile, soldering or press-fitting supply, and getting depth right to the finished surface – get it wrong and you’re paying twice for the same wall. Same with M-CORE housing replacement; the plastic cracks on over-torque and you won’t know until the wall’s closed. Those are a call-the-crew items, not a Saturday project. Call (844) 797-8316 and we’ll tell you honestly which category yours falls in.

FAQs

How long does a Moen cartridge last in Miami Gardens? Moen’s 1222 and 1225 cartridges typically run 7 – 12 years on standard water, but in Miami Gardens’ harder municipal supply the hot seat O-rings often fail closer to 5 – 8 years – the heat and sediment accelerate it. If you’re past six years and the handle’s getting stiff, the cartridge is due.

Can the Moen valve be repaired instead of replaced? Yes, more often than not. A leaking Posi-Temp or Moentrol valve usually needs a cartridge and seat O-rings, not a new body – the valve body itself rarely fails. If the M-CORE housing is cracked or the balancing spool is seized, replacement is the honest answer. Call (844) 797-8316 and we’ll diagnose before we open a wall.

How long does the swap take on a typical Moen trim in an addition? A cartridge swap is a 45-minute to 1.5-hour job once the water’s off and the trim is accessible. A full valve body replacement in a tiled addition shower is a half-day to full-day job that includes opening and closing the wall. You’ll know the scope before we start.

How do you source the Moen part for my model? We read the rough-in model off the valve body or plaster guard, confirm the trim series mates to it, and order the genuine part. We don’t carry parts on a truck and don’t claim to – the part gets ordered for your job. If there’s a wait, you’ll know it up front. Call (844) 797-8316 for a free estimate and we’ll price the part and labor in writing.

Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-8316
Local Service Coverage

Request a Free Estimate in Miami Gardens

Tell us what you need - Barrett & Sons Construction Miami Gardens responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch