Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Sterling Home Additions & ADU: The Miami Gardens Owner’s Guide
If you own a Sterling-built home or a Sterling addition and the structure has started showing its age – sticking doors, a roof tie-in that leaks, a room that never quite held its temperature – we can work on it. In Miami Gardens, home additions run $53100-$153400 installed, and standalone ADU construction runs $106200-$259600, depending on foundation, roof tie-in, impact glazing, and finish level. We’re an independent contractor, not affiliated with Sterling, but we know how their addition framing and tie-in details go together.
Most Miami Gardens owners don’t wake up thinking about the addition. They notice it sideways: a hairline crack that appeared along the seam where the new roofline meets the original house, a bedroom over the garage that stays five degrees hotter than the rest of the home, or a patio door in the addition that you have to shoulder shut every August. Those small things are how a Sterling addition tells you it’s ready for attention.
Key Takeaways
- Addition work in Miami Gardens typically runs $53100-$153400; a full ADU runs $106200-$259600.
- We’re independent – not Sterling-affiliated – and we pull every permit the job needs.
- Every scope, allowance, and price change is in writing before the work starts.
- The 90-Day Done Right Promise is on the contract, not in small print.
- A live person answers the phone 24/7 at (844) 797-8316.
Which Sterling Models This Applies To
Sterling has fabricated homes, modular additions, and accessory structures across a wide span of years, and the construction methods shifted more than most owners realize. Early modular additions often used panelized wall systems with a specific tie-in to the primary structure’s top plate; later ADU and addition kits moved toward stick-framed assembly on-site with a published connection schedule. The label matters less than what’s actually in front of us: we look for the data plate on the unit (usually in the utility closet, the electrical panel door, or the frame of the main entry), the original construction drawings if the previous owner kept them, and the physical dimensions of the tie-in.
Where owners get tripped up is assuming a “Sterling-compatible” part from an online seller will drop in. It won’t, always. The wall stud spacing, header size, and anchor schedule on a Sterling addition from one production run can differ from another by a couple of inches and a different fastener spec – and those inches matter when you’re hanging an impact-rated window or matching a new roof plane to the existing one. We measure what’s there and specify to the actual structure, not to a catalog listing. If a manufactured component is the right answer, OEM is often the cleanest fit, and a quality aftermarket equivalent is a reasonable substitute when the OEM part isn’t available on the timeline you need.
The brands we install across the other trades – KraftMaid and Cambria in kitchens and baths, Silestone for counters, GAF and CertainTeed roofing shingles, Andersen and Marvin windows – come with their own compatibility questions, so we treat each addition as its own build spec.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Sterling Home Additions & ADU Is Failing
- Water staining at the roof tie-in. The valley where the addition roof meets the original almost always fails first, and Miami Gardens’ summer downpours find every weak flashing lap. That’s a flashing and underlayment problem, not a shingle problem – the shingles usually look fine from the ground.
- Sticking doors and windows along one wall. When the interior doors in the addition start dragging in one specific spot, it’s often a sign the slab or footing has shifted, or the humidity has swelled the framing in a way the original build didn’t plan for.
- Hot or cold rooms that never balance. A room over the garage or a converted porch that stays 6-8 degrees off from the rest of the house usually points to missing or undersized insulation in the addition’s envelope, or a duct run that was never properly sized for the added square footage.
- Hairline cracks at interior corners and ceiling seams. Some movement is normal in Florida’s soil, but cracks that widen over a season – especially at the addition-to-house junction – are worth a look before they become a structural conversation.
- A patio door in the addition that won’t latch or seal. The frame settles slightly, the latch misaligns, and the weather seal opens up. Left alone, that becomes an air-infiltration and moisture problem for the whole wall assembly.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Installed pricing for addition and ADU work in Miami Gardens, based on what we’re actually quoting this market:
| Scope | Installed Range |
|---|---|
| Home Addition (single-room to full wing) | $53100-$153400 |
| ADU Construction (standalone unit) | $106200-$259600 |
| Garage Conversion (habitable space) | $35400-$94400 |
| Roof Replacement (on the addition or main house) | $9440-$23600 |
| Impact Window Installation | $9440-$29500 |
What drives the number up or down: foundation work (especially on Miami Gardens lots with high water tables), impact glazing required under Florida code, roof tie-in complexity, interior finish level, and permit-driven engineering. Every allowance is itemized on the estimate – no mystery line items. The permit is pulled, the inspection is signed, and the 90-Day Done Right Promise covers the work when we’re done.
DIY or Call Us?
You can safely check a few things yourself: look for the data plate, photograph the tie-in from the ground, note which rooms run hot or cold, and watch whether a crack is actively widening by marking it with a pencil line and a date. That’s useful information to bring to a contractor.
What you shouldn’t do is open up the roof tie-in, cut into the framing to inspect a footing, or try to re-flash a valley on a two-story addition yourself. The heights alone are dangerous, and a poorly done flashing repair puts water behind your wall assembly where it does silent damage for a year before you see it. Same goes for anything that touches the structural connection between the addition and the original home.
If something on this list is showing at your place, call (844) 797-8316. We’ll come look, tell you honestly what needs attention and what can wait, and put the scope in writing before anything gets touched.
FAQs
A well-built addition framed in treated lumber with a correctly installed roof and impact-rated openings should hold up 30 to 50 years in South Florida’s climate, with roof replacement around year 18 to 22 and ongoing attention to caulking, flashing, and paint. The variables that shorten that lifespan most are roof tie-in water intrusion and unaddressed slab movement, which is why the annual inspection of those two points matters more than almost anything else. Call (844) 797-8316 for an honest read on yours.
Usually yes. Failing flashing, worn roof surfaces, impact-window seals, and small slab cracks are all repair items, not rebuild items. The rebuild conversation only comes up when the structural connection between the addition and the original home has moved enough that the framing itself is compromised – which is rare. We’ll tell you straight which situation you’re in.
A roof tie-in repair or window swap on an addition usually takes a day or two of on-site work; a full roof replacement on an addition runs two to four days; a garage conversion runs several weeks depending on finish scope; and a full ADU build runs months. We give you a written schedule with the estimate so you’re not guessing.
We source OEM-compatible components where the original spec matters – the framing anchor schedule, the tie-in flashing profile, the impact-window frame dimensions – and substitute quality aftermarket equivalents only when OEM isn’t available on your timeline, and only with your written sign-off. Every part spec is on the estimate so you can look it up. Call (844) 797-8316 to get the process started.
Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.