A Barrett company - serving Miami Gardens, FL

Owens Corning Home Additions & ADU in Miami Gardens, FL

Home additions & ADUHome additions & ADU
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Owens Corning Home Additions & ADU: The Miami Gardens Owner’s Guide

Owens Corning home additions and ADU work in Miami Gardens typically runs $53,100 – $153,400 for a full addition, and we schedule a free on-site estimate rather than quoting a firm number over the phone, because the scope (footprint, roof tie-in, permits, foundation) decides the price. If you own a property where an Owens Corning-built addition or accessory dwelling unit is showing its age, you’re probably reading this because something failed: a soft spot in a wall, a ceiling stain after a rainy August, a door that no longer closes square, or an inspector’s note on a permit file. We install and repair Owens Corning-compatible additions across Miami Gardens and know exactly how their fiberglass and foam systems age in South Florida heat and humidity. Barrett & Sons Construction is an independent contractor and is not affiliated with Owens Corning.

Call (844) 797-8316

Which Owens Corning Models This Applies To

Owens Corning doesn’t sell “an addition model” the way a carmaker sells a trim line. What they sell is a system of insulation, sheathing, roofing components, and composite products that a builder assembles into an addition or ADU. That means matching the right Owens Corning product depends on the assembly, not a serial number. The most common Owens Corning components in a Florida addition are their FOAMULAR rigid foam board (used under slabs and on exterior walls), Propink loose-fill and blown insulation, Pink Fiberglas batts, and their Duration and Oakridge shingle lines on low-pitch and hip roofs.

To identify what’s actually installed, check the ceiling joists in the attic for a paper or foil facing printed with the Owens Corning name and an R-value (R-13, R-19, R-30 are common here). On the exterior walls, look for blue or pink foam board stamped “FOAMULAR” and a thickness code (usually 1 in. or 2 in.). On the roof, pry up one shingle tab and check the back for the manufacturer’s seal. Once you have the R-value, foam thickness, and shingle line, matching a replacement part is straightforward. Where owners go wrong is assuming all fiberglass batts are interchangeable. They aren’t. R-value, width (15 in. vs 23 in.), and vapor-open vs vapor-closed facing all matter in our climate, and the wrong facing can trap moisture in a Miami Gardens wall.

On the OEM-versus-aftermarket question: for FOAMULAR and Propink, there is no meaningful “aftermarket” – the OEM product is the standard. For roofing components and flashing, quality aftermarket equivalents are fine if they meet Miami-Dade NOA (Notice of Acceptance) requirements. Owens Corning shingles carry their own product approvals, so if a roofer is quoting you a generic replacement on an Owens Corning roof, ask to see the NOA. Our crew members have up to 28 years of experience matching these systems, and we’ll tell you plainly when OEM matters and when it doesn’t.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Signs Your Owens Corning Home Additions & ADU Is Failing

  • Ceiling stains or soft drywall after heavy rain. Almost always a roof or flashing failure, not the insulation itself. On Owens Corning Duration roofs in Miami Gardens, the usual culprit is failed pipe boots or step flashing at the addition-to-house tie-in, where two roof planes meet.
  • Attic insulation that’s settled, compressed, or damp to the touch. Blown fiberglass loses R-value when it gets wet or is crushed by stored boxes. If your Propink or Pink Fiberglas has dropped below the joist tops, you’re paying for it in summer electric bills.
  • Musty smell inside the addition with no visible leak. That’s usually a wall cavity trapping moisture because the vapor facing was installed wrong. In our humidity, a vapor-closed batt on the wrong side of the wall becomes a mold nursery.
  • Doors and windows that stick or won’t latch. This points to foundation or framing movement, common on additions built on shallow footings in Miami Gardens’ sandy soil and high water table. It’s a structural question, not a parts swap.
  • Visible cracks in exterior stucco or foam board seams. FOAMULAR board seams that weren’t taped and flashed correctly will telegraph through stucco as hairline cracks, and each crack is a water entry point in a sideways summer storm.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

Pricing for Owens Corning-compatible addition work in Miami Gardens depends on scope. Here’s how the numbers break down by job type, installed:

  • Home addition (new construction or significant rebuild): $53,100 – $153,400. This range covers framing, sheathing, insulation, roofing, exterior finish, and interior tie-in.
  • ADU construction: $106,200 – $259,600. ADUs cost more per square foot because of separate utilities, separate entry, and a full second set of permits.
  • Garage conversion (often the cheapest ADU path): $35,400 – $94,400.
  • Roof replacement on an addition, Owens Corning shingles: $9,440 – $23,600.
  • Roof repair, including flashing and pipe boot work: $470 – $2,125.

What drives the range: footprint and ceiling height, whether the addition ties into an existing roofline or stands alone, whether you’re building on a slab versus a raised floor, and how much interior finish you choose. Miami-Dade product approvals and inspections add to cost but aren’t negotiable. Every estimate we write is line-item, with allowances spelled out in writing. Every scope change gets a written change order before we touch the job. Every eligible job has permits pulled and inspections signed. And every completed job is backed by our 90-Day Done Right Promise, in writing on the contract.

DIY or Call Us?

An owner can safely check a few things: look in the attic for a printed Owens Corning label and note the R-value, feel insulation for dampness (with gloves, not bare hands), and photograph any ceiling stains with a tape measure beside them. That’s useful information to hand a contractor.

What not to do: don’t climb on an Owens Corning shingle roof to inspect it yourself. South Florida roofs are hot, steep, and slippery even when dry, and a fall from a one-story addition roof is a life-altering injury. Don’t crawl into a tight attic in summer heat. And don’t try to re-face a vapor barrier or re-tie flashing at an addition-to-house junction – if it’s done wrong, you won’t know until the next storm. Roof work and structural framing are not weekend projects.

Call (844) 797-8316 and we’ll come look. A live person answers, day or night.

FAQs

How long does an Owens Corning home addition or ADU last in Miami Gardens?
With proper installation and maintenance, an Owens Corning-insulated addition or ADU should last 30 to 50 years on the structure, with the roofing system (shingles and flashing) replaced at roughly 15 to 20 years in our sun and storm climate. FOAMULAR board on the exterior will outlast the stucco over it if the seams were properly taped and flashed.

Can it be repaired instead of replaced?
Often yes. Ceiling stains from a failed pipe boot or step flashing are typically a $470 – $2,125 roof repair, not a rebuild. Settled attic insulation can be topped off rather than replaced. Structural cracks in framing or foundation are usually the case where repair scope grows. Call (844) 797-8316 and we’ll tell you honestly which side of that line you’re on, with a free estimate and a free second opinion on any written estimate you’ve already got.

How long does the swap or repair take?
A roof flashing or pipe boot repair is typically a single-day job. Topping off attic insulation in an addition or ADU is usually a day. A full roof replacement on an addition runs several days depending on size and weather. Full addition builds run weeks to months and depend on the permit timeline – we’ll give you a real schedule in writing, not a guess on the phone.

How do you source the part?
We source Owens Corning components through licensed building supply channels, matched to your installed product’s R-value, thickness code, or shingle line. We’ll bring the spec sheet so you can look up the product yourself before we install a thing. Barrett & Sons also installs KraftMaid, Cambria, and Silestone on the interior finishes of any addition or ADU. Proudly serving Miami Gardens and the surrounding communities, with our 10% senior and veteran discount available on every job.

Call (844) 797-8316 to schedule your free estimate. Our technicians have up to 28 years of experience, and we’ll show you exactly what’s failing and what it costs to fix before you commit to anything.

Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (844) 797-8316
Local Service Coverage

Request a Free Estimate in Miami Gardens

Tell us what you need - Barrett & Sons Construction Miami Gardens responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - 24/7 Dispatch