Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ES Windows Roofing: The Miami Gardens Owner’s Guide
ES Windows roofing components – the flashing kits, drip edge, and closure strips that mate ES Windows’ opening systems to your roof line – are installed by our crews at Barrett & Sons Construction Miami Gardens, with typical replacement running $470 to $2,125 for a focused repair and $9,440 to $23,600 when a roof section behind the failed part has to come off and go back on. If water shows up at the intersection of an ES Windows window head or skylight curb and the roof deck, the roofline below the frame is where we start. A failed nail-fin flashing, a rotted closure strip, or a drip edge that disappeared into the fascia during the 2024 rainy season announces itself the same way every time: a brown ring on the ceiling, a soft spot at the corner of your soffit, or a section of Miami Gardens stucco that keeps getting chipped paint from water splashing where the wall meets the roof.
Which ES Windows Models This Applies To
The parts we see on Miami Gardens properties most often sit at the seam between ES Windows’ storm and impact product lines and the roof – the nail-fin and buck flashing that come with their window and door frames, the closure strips that seal the frame-to-deck transition, and the drip edges and head flashings that carry that interface onto a shingle or tile roof. ES Windows doesn’t publish a single universal flashing kit; the part that fits depends on which product series is mounted and the size of the rough opening. That matters because the closure strip for a 36-inch unit is a different width than the one for a 60-inch unit, and the nail-fin depth changes with the rough opening depth.
The first thing to do is find the labels. ES Windows stamps a product series and unit size on a label on the frame or in the jamb; failing that, take a tape measure to the visible width and height of the unit. That label, not a photo, is what we use to match a replacement part.
OEM versus aftermarket for ES Windows is a real decision. The OEM flashing and closure strips match the profile ES Windows built the frame for, and if your home is under a Miami-Dade NOA (Notice of Acceptance) for wind-driven rain, keeping the original system intact can matter if you ever sell or have to prove code compliance after a storm. Quality aftermarket equivalents exist and cost less, but the profile has to match to the millimeter or the seal at the frame breaks. Barrett & Sons is an independent contractor, not affiliated with ES Windows; we install parts matched to their system rather than selling ES Windows-branded goods ourselves.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your ES Windows Roofing Is Failing
Miami Gardens humidity and the June-to-November storm season punish a roof-frame seal hard, and the failure usually announces itself months before water reaches drywall. Here’s what to look for:
- Water stains on the ceiling under a window head or skylight curb. A cracked or hardened closure strip lets wind-driven rain past the frame, and the water tracks along the top plate before it drops. The stain appears feet from the actual break, so don’t assume it’s the window itself.
- Lifted or curled drip edge along the eave near the ES Windows opening. Aluminum drip edge that wasn’t bedded properly lifts when the fascia behind it swells from seasonal moisture, leaving the eave open to splashback. Once the edge lifts, water gets under the shingles behind it.
- Rotting or crumbling fascia or soffit at the roof-to-wall transition. A leaking nail-fin flashing rusts the fasteners that hold the fascia, and you see sagging or dark staining. By the time it’s visible, the wood behind it is usually soft to the touch.
- Daylight or a draft visible at the frame-to-ceiling junction. A shrunken closure strip leaves a gap, and in a Miami Gardens attic above that gap you’ll often find insulation that’s wet or compressed. This one is a wind-resistance warning as much as a water one.
- Granules, black streaks, or mold at the head of the roof section facing the unit. Water backing up behind a failed head flashing shortens the shingle life in that spot only, which is why you see a strange localized patch rather than a uniformly aged roof.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Cost in Miami Gardens depends on whether the part sits at the roof surface or under it. Here’s how the ranges fall:
- Drip edge and closure strip replacement: typically inside the $470 to $2,125 roof repair range when the part can be reached from the perimeter or a small cut-in opening.
- Flashing replacement at a roof-to-frame transition: also in the $470 to $2,125 band for a focused job, climbing toward the top of it when the adjacent shingles or underlayment have to come off and be reinstalled.
- Reroofing a section that pushed the damage into the deck: $9,440 to $23,600 for a full roof replacement, which is what a long-neglected flashing leak sometimes requires.
- Tile sections: if ES Windows openings sit in a tile-roof area, expect $710 to $2,950 for the tile work plus the flashing component.
Every job comes with a written scope listing the part, the labor, and any allowance for wood or underlayment repair, plus a written change order before any of that scope changes – the allowance that isn’t on paper is a surprise waiting for a date. Permits are pulled where the job requires them, and every repair is backed by the written 90-Day Done Right Promise.
DIY or Call Us?
You can safely inspect much of this yourself. From the ground or an attic hatch, look for the water stains, check whether the drip edge is seated under the shingles, and see whether the closure strips around an ES Windows frame are pliable or crumbling. Walk the attic after a storm and check the insulation. Replace a single exposed closure strip on a ground-floor, low-slope section and that’s reasonable territory for a careful homeowner.
What isn’t safe is getting on a wet roof, especially a tile or steep-pitch roof in Miami Gardens storm weather, or pulling back shingles and underlayment to reach a buried nail-fin flashing. Falls are the injury this work produces, and roof-deck fasteners that won’t hold are the second one. If the flashing is under the roof surface, call (844) 797-8316 – a live person answers day or night and will set up a free estimate with no trip charge inside the county.
FAQs
Eight to fifteen years is a realistic window for a properly bedded flashing and closure strip in this climate, and less on a south- or west-facing roof section where UV degradation is hardest. The soft, pliable closure strip ES Windows uses at the frame-to-deck transition hardens in the heat and loses its seal long before the aluminum flashing rusts, which is why we inspect both when only one is showing a problem. Call (844) 797-8316 for a free second opinion on any estimate you’ve already received.
Often yes. A lifted drip edge can be re-bedded, a flashed corner can be resealed, and a single failed closure strip replaced without touching the rest of the system. What we can’t do is reglue a hardened closure strip or cover rust on the flashing with sealant – that fails the next storm. We’ll tell you honestly which one you need, and the second opinion is free.
A reachable closure strip or drip edge segment is a half-day job; a buried flashing at a roof-to-frame transition is usually one to two days once the shingle or tile removal is included. If reroofing a section is involved, plan on several days and get the schedule in writing before work starts.
We identify the unit from the ES Windows label or measured dimensions, then order the matching flashing, closure strip, or drip edge – OEM profile where the system calls for it, a matched aftermarket equivalent where it doesn’t. We don’t claim to carry ES Windows parts on a truck; each part is ordered against your actual opening. We also service KraftMaid, Cambria, and Silestone installations, but for roofing the parts come from reputable roofing-supply brands we install and can name on the invoice. Call (844) 797-8316 to get started – estimates are free.
Barrett & Sons Construction Miami Gardens is an independent contractor and is not affiliated with, endorsed by, or authorized by ES Windows.
Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.