Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Therma-Tru Roofing: The Miami Gardens Owner’s Guide
If a Therma-Tru entry-system component on a roof penetration or attached porch structure is failing in Miami Gardens, we replace the affected flashing and seal assembly for roughly $470 to $2,125 installed, and a full roof replacement runs $9,440 to $23,600. Our crew members have up to 28 years of experience and book these jobs fast, though we don’t promise same-day work – that’s not honest for roof work and you shouldn’t believe anyone who does.
Owners usually spot the trouble after a hard summer storm. Water stains fan across a ceiling near the entry, a bead of sealant pulls loose over a door header, or a soffit board starting to soften. You see the symptom inside weeks before anyone thinks to look at the flashing outside. That gap between what you notice and what’s actually leaking is where small roof repairs turn into ceiling repairs.
Which Therma-Tru Models This Applies To
Therma-Tru is a door and entry-system maker, so the “roofing” side of a Therma-Tru installation is the flashing, thresholds, sill pans and header trim where their entry system meets the roof structure or porch ceiling. This page covers that interface – the parts that actually keep Miami Gardens rain out – not the shingles themselves.
Identifying the right part starts with the door itself. Therma-Tru stamps model information on a label inside the hinge jamb, and the sill pan width, threshold depth and frame dimensions all change by series. The Fiber-Classic, Smooth-Star and Classic-Craft lines each use different sill systems, and a sill pan cut for one series will not seat right on another. Measure the rough opening, the frame depth, and the sill pan length before you call anyone. Guessing is how you end up with a part that “fits” until the first windy day.
On the OEM question: Therma-Tru factory flashing and sill parts are the surest fit for a factory door. Quality aftermarket equivalents from a reputable supplier can work, but the profile has to match the sill geometry exactly, or you get a small gap you will spend a rainy season chasing. For a Miami Gardens home, we lean factory when the door is younger and clearly labeled, and we look hard at the specific part when the door is older and the original lineup has changed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Therma-Tru Roofing Is Failing
- Cracked or peeling sealant along the header trim. South Florida sun bakes caulk on the west and south exposures until it shrinks and splits. Water finds that seam next time it blows sideways.
- Water staining on the ceiling or wall near the entry. That’s a flashing failure upstream, not the paint. The stain shows up hours or days after the rain, which is why it gets misdiagnosed.
- Soft soffit or fascia board above the door. Repeated wetting rots the wood behind the trim. By the time it feels soft, the board needs replacement, not a coat of paint.
- Daylight or a draft around the frame at the top corners. A shifted sill pan or lifted flashing leaves a gap. You feel it on a cool morning and dismiss it.
- Staining or corrosion on the metal flashing itself. Salt air speeds this up in Miami Gardens. Once the metal is pitted or the fasteners are losing their grip, patching over it just hides the problem.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here is the honest range for this work in Miami Gardens, and it stays the same every time we quote it.
| Service | Installed Range |
|---|---|
| Roof repair (flashing, seals, localized) | $470 – $2,125 |
| Tile roof repair | $710 – $2,950 |
| Full roof replacement | $9,440 – $23,600 |
What drives the number: the size of the entry, how much wood rot we find once the trim is off, tile versus shingle, and whether the flashing detail requires reworking the roof deck. Parts and labor are itemized line by line, so you see what the part costs and what the work costs. Every price change arrives as a written change order before any nail moves. Every eligible job gets permits pulled and inspections signed. All of it backs up to the 90-Day Done Right Promise – if it isn’t right, one call brings Tom back.
DIY or Call Us?
Some of this you can check yourself, and we’d rather you did. Look at the flashing from the ground with binoculars, feel the soffit for soft spots, watch where water drips after a hard rain and note it. That information helps us quote accurately.
Where DIY goes wrong: anything above a single story, anything involving tile removal, and any work where you’d be crawling onto a roof plane. Roof work is genuine fall risk, and in Miami Gardens we’ve re-done plenty of handyman flashing that looked fine until the first real storm. A slipped sill pan or a poorly sealed flashing detail leaks quietly for a year before you see it. If that’s where you are, call us at (844) 797-8316 and we’ll get a free estimate on the calendar.
FAQs
Expect 8 to 12 years on a well-installed flashing and seal assembly in South Florida, and less on a west- or south-facing entry where the sun and salt air hit hardest. UV degrades sealant faster here than in most of the country, and we see failures earlier than owners expect. For a specific quote on yours, call (844) 797-8316 – estimates are free.
Sometimes yes – if the flashing is intact and only the sealant has failed, a proper re-seal is a real repair, not a patch. If the metal is pitted, the fasteners are loose, or the wood behind the trim is soft, replacement is the honest answer because a patch won’t hold through a rainy season. We’ll tell you which case you’re in when we look. Call (844) 797-8316 for a free estimate.
A localized flashing and seal replacement is typically a one-day job, and a full roof replacement runs several days depending on size and weather. We schedule around the forecast in Miami Gardens so you’re not left with an open roof when the afternoon storms roll in. Call (844) 797-8316 to schedule your free estimate.
We order by the model number off the door’s hinge-jamb label and match the sill and flashing profile exactly, using factory-compatible parts where they’re the right fit. We don’t carry parts on a truck or stock them locally – we order the exact specification, which is precisely why the label and your measurements matter. Call (844) 797-8316 and have that label ready. We also service KraftMaid, Cambria and Silestone in the trades they belong to.
Barrett & Sons Construction Miami Gardens is an independent service provider and is not affiliated with Therma-Tru. For a Therma-Tru-compatible roofing repair or replacement in Miami Gardens you can verify before you sign, call (844) 797-8316 for a free estimate. We live close by and we answer our own phone.
Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.