Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Home Additions & ADU: The Miami Gardens Owner’s Guide
We install Jerith-compatible home additions and ADU packages for Miami Gardens homeowners, and a typical project here lands in the $53,100 – $153,400 range once permits, foundation, framing and finishes are counted. This is planned construction, not an emergency call, so we don’t promise same-day work – we schedule it and we quote it in writing first.
Most Miami Gardens owners don’t discover their add-on has failed like a breaker flipping or a fence post snapping. It creeps up. A permitted addition stuck at a stalled stage, an ADU framed on a handshake with the permit never filed, an aging addition where the tie-in to the main house is wrong and the ceiling starts to sag a quarter-inch a year. Or the smaller failures tied to the door and window pieces inside that addition: Jerith hardware that won’t latch because the slab has shifted, thresholds that no longer seal, hinges that rust through after a few wet seasons. By the time you call, you’ve usually had one contractor quote a number and another quote something else, and neither matched what came at the door.
Key Takeaways
- Installed Jerith-compatible addition packages in Miami Gardens run $53,100 – $153,400 depending on size, foundation and finish.
- We are an independent contractor. We are not affiliated with Jerith, and we install compatible hardware and components, not branded product from their factory.
- Whoever you hire: the permit should be pulled before framing, and every price change should arrive in writing before the next nail moves.
- We carry up to 28 years of crew experience. Every eligible job gets permits and signed inspections, and every completed job carries a 90-Day Done Right Promise.
Which Jerith Models This Applies To
Jerith’s reputation in Florida was built on aluminum and vinyl fencing and railing, and the company also manufactures modular and sunroom-style structures. The Jerith components that show up inside home additions and ADUs here in Miami Gardens are mostly the hardware and enclosure pieces: door hardware, gate hardware, thresholds, jamb brackets, lantern-rail fittings, and the aluminum extrusions that tie an enclosure together. If you bought an older Jerith-labeled entry door, sunroom panel or railing package, you have a real product and we can usually match the replacement.
The gotcha that catches people: Jerith changed post and rail profiles across its runs over the years, so a bracket that fit a 1990s rail will not fit a later one. Before you order anything, find the sticker or stamped code on a post, a hinge plate or the door frame – usually a small tag on the gate-side post or the track. Photograph it and take the thickness and width of the rail with a tape measure. Without that code, you’re guessing.
OEM vs aftermarket for Jerith comes down to one question: is the part visible and structural, or hidden and functional? On a rail or a gate latch people see, we source the closest correct Jerith-spec part or a name-brand equivalent you can look up. On a hidden hinge or threshold, a quality aftermarket match is fine and costs less. Either way, we tell you which one you’re getting and why.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your Jerith Home Additions & ADU Is Failing
- A door in the addition won’t latch or drags on the threshold. The slab or footing has moved because of Miami Gardens’ high water table and limestone subgrade, or the framing has swelled after a wet season. The door isn’t the problem – the structure behind it is.
- The tie-in to the main house shows a gap, hairline crack or moisture stain. This is the seam between new and existing construction, and it’s where nearly every addition leaks first. It usually means flashing or the roof line was underbuilt.
- Jerith hardware corrodes or freezes up. South Florida’s salt air and humidity eat hardware faster than upstate, and a part that lasted a northern buyer fifteen years may go seven or eight here.
- The addition has settled out of square – windows stick, floors feel uneven, the roof line sags. Foundation problems in this soil are common and get worse each summer rain. This is the one you don’t put off.
- You have an unpermitted ADU or addition and the county flagged it. No signed inspection means no legal use, no clean resale, and the fix can be costly. The earlier you get it on record, the better.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s the honest price picture for Miami Gardens. An installed home addition runs $53,100 – $153,400. A detached or attached ADU is $106,200 – $259,600 depending on size and whether it needs its own utilities. A garage conversion is $35,400 – $94,400 and is often the cheaper path to livable space.
What drives the range: square footage, foundation type in that limestone, roof tie-in detail, how much of the work is a Jerith-compatible enclosure versus a full stick-built structure, and interior finish grade. Below is how those numbers compare across the work:
| Project | Typical installed range (Miami Gardens) |
|---|---|
| Home Addition | $53,100 – $153,400 |
| ADU Construction | $106,200 – $259,600 |
| Garage Conversion | $35,400 – $94,400 |
Parts and labor are quoted as separate line items so you can see what the hardware costs versus the install. Every eligible job gets permits pulled and inspections signed, and the finished work carries our 90-Day Done Right Promise. Ask about the Free Second Opinion on Any Written Estimate if you have a competing bid in hand.
DIY or Call Us?
Some things you can check yourself. Measure the rail thickness on your Jerith gate post, photograph the code tag, watch whether the door drags at the top or bottom, and note any gap at the tie-in to the main house. That information helps us and costs you nothing.
What we don’t recommend: trying to fix the structural side of an addition on your own. Cutting into a load-bearing tie-in, reframing a sagging header, or pulling apart a permitted enclosure without knowing the flashing detail goes wrong fast and voids the inspection. If it’s a single exterior gate latch or a railing bracket, that’s a fair weekend job. If it’s what sits behind the wall, call us. Give us a call at (844) 797-8316 and describe what you’re seeing; a crew member answers, not a call center.
FAQs
A well-installed aluminum enclosure here should give you twenty to thirty years, but the hardware – hinges, latches, thresholds – is the short-lived part at roughly seven to twelve years because of salt air and humidity. The aluminum itself holds up; the moving parts don’t. Call (844) 797-8316 if your hardware is past that window.
Often yes, and we’ll tell you when repair is the smarter spend. A single latch, a hinge or a worn threshold is a repair. A sagging tie-in or a settled footing is a structural fix. We look first before we quote a replacement. Call to set up a walk-through – estimates are free.
Hardware-only work is usually finished in a single visit; a full addition or ADU install runs weeks to months depending on permits and inspection scheduling. The permit timeline is the honest long pole, not the labor. Call (844) 797-8316 for a written scope with a realistic schedule.
We match from the code on your post, hinge plate or frame, then confirm measurements before ordering – you get the part that fits your run, not a generic guess. We don’t carry Jerith stock and don’t claim to; we source what your specific unit needs. Call for an exact quote; we also price KraftMaid, Cambria and Silestone when finishes are part of the job.
Call (844) 797-8316 for a free estimate. We’ll pull the permit, put the scope and every price change in writing before work starts, and stand behind the job with our 90-Day Done Right Promise. Our crew members are background-checked and carry the Barrett & Sons name – you’ll recognize the work, and you’ll know who did it.
Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.