Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Kitchen Remodeling: The Miami Gardens Owner’s Guide
A PGT kitchen remodel in Miami Gardens typically costs $16,520 to $53,100 installed, depending on cabinet layout, countertop material, and whether plumbing or electrical has to move. That range covers full tear-out and rebuild with KraftMaid or Cambria specified and every price change issued as a written change order before work starts. PGT products hold up well in South Florida heat and humidity, but time, sun, and the occasional storm take their toll. Most Miami Gardens owners find out something has failed the same way: a door that won’t close flush, a finish that’s started to lift, or a hairline crack that appeared after a rainy season. It’s rarely dramatic. It’s a slow thing you notice one Saturday morning.
Which PGT Models This Applies To
PGT makes windows and doors across several series, and the part you need depends entirely on which series is in your home. The WinGuard line is the most common in Miami Gardens – it’s impact-rated and built for Florida wind zones, and its hardware, weatherstripping, and screen components are series-specific. The Estate Collection and the aluminum series each use different locking mechanisms, rollers, and gasket profiles. A WinGuard lock won’t fit an Estate Collection sash, and the reverse is also true.
Your first job is identification. Open the unit and look for the etched label on the glass edge, usually in a lower corner. That label carries the model and series code. If it’s worn or painted over, measure the visible glass, the frame depth, and the sash height, and take a photo of the lock and hinge. Anyone quoting you a PGT part without asking for those three things is guessing.
OEM versus aftermarket comes down to fit and finish. PGT factory parts match the original tolerances exactly, which matters most on impact-rated units where the hardware is part of the wind-load rating. A good aftermarket equivalent can work for cosmetic pieces like screen frames and standard rollers, but on the locking hardware and the glazing gaskets, we specify OEM. It costs more and it’s worth it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Signs Your PGT Kitchen Remodeling Is Failing
These are the symptoms Miami Gardens homeowners call us about most often on PGT units, and what’s usually behind them:
- The sash won’t latch or seal tight. Worn lock hardware or a sagging hinge. A gap of even a quarter inch lets humid air in, and in Miami Gardens that means condensation and eventually mildew along the frame.
- The finish is blistering or peeling. UV exposure and salt air. PGT’s finishes are tough, but after a decade of direct afternoon sun, the coating on aluminum frames can chalk and lift. That’s cosmetic until it isn’t – once moisture gets under the finish, corrosion starts.
- The gasket or weatherstripping is hard or cracked. Heat aging. Rubber gaskets stiffen over time, lose their seal, and start letting water past. You’ll notice it as a draft or a damp spot near the sill after a hard rain.
- The glass has a foggy haze between the panes. Seal failure in the insulated glass unit. Once the seal breaks, moisture gets in and the unit loses its insulating value. On PGT impact units, that’s a glazing replacement, not a whole-window job.
- A hairline crack in the frame or sill. Settling or storm stress. Small cracks widen with each temperature swing. Left alone, they compromise the wind rating, which is the whole reason you bought impact-rated in the first place.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
What you’ll pay depends on the part and the series. Most single-part replacements land at the low end; a full glazing unit or a set of impact-rated locking hardware runs higher. Here’s how the work breaks down for Miami Gardens:
- Weatherstripping or gasket replacement: modest, usually a same-visit job once the correct profile is matched.
- Lock, hinge, or roller hardware: OEM parts plus labor, priced per piece.
- Insulated glass unit (glazing) replacement: the higher end, because the unit has to match the rating.
- Frame or sill repair: quoted only after we inspect, since the fix depends on how far the damage runs.
You get a written line-item quote before we touch anything: the part number, the cost, the labor, and the tax. If substituting an aftermarket piece would save you money without compromising the rating, we’ll tell you. Every repair over $200 carries $40 off, second opinions on any written estimate are free, and there’s no trip charge inside the county. The work is backed by the 90-Day Done Right Promise – if something’s off, one call brings us back.
DIY or Call Us?
Some things you can safely check yourself. Look for the etched label and write down the series code. Photograph the failed part. Test whether the sash latches and whether the gasket feels pliable or brittle. Clean the track and see if the unit moves freely. Those steps cost nothing and help any contractor quote you accurately.
Where DIY goes wrong is on impact-rated hardware and glazing. These units are engineered as a system; the lock and the gasket are part of the wind-load rating, and swapping in a part that looks close but isn’t rated can quietly void the protection you paid for. We’ve also seen homeowners crack a frame trying to force a sash that was actually a hinge problem. On anything that involves the rating or the frame, that’s a licensed job. For the simpler cosmetic pieces, a careful homeowner can handle it, and we’ll tell you honestly which side of the line your job falls on. Call (844) 797-8316 and we’ll sort it out.
FAQs
Hardware and gaskets typically hold up well for many years, but South Florida’s sun and humidity shorten that compared to cooler climates. Rubber weatherstripping often needs attention first, and impact-rated locks see wear from daily use. When a part starts failing, replacing it early protects the rest of the unit.
Sometimes, yes – a stiff lock can often be cleaned and adjusted, and a minor gasket split may be patchable. But once gaskets are hard or the glazing seal has failed, replacement is the honest answer. We’ll tell you which one you’re looking at rather than selling a repair that won’t hold.
Most single-part replacements are a one-visit job once the correct PGT part is in hand. The variable is sourcing the right series-specific component, which is why getting the model code off the label matters. We’ll give you a realistic window up front, not a guess.
We match your series code to the correct OEM component, or a quality equivalent where it’s appropriate. We don’t claim to carry parts on a truck or stock them locally – the right part is ordered to your unit, not pulled from a bin of near-fits.
One note on who we are: Barrett & Sons Construction Miami Gardens is an independent service provider and is not affiliated with PGT. We install and service PGT products, along with KraftMaid, Cambria, and Silestone in kitchens across Miami Gardens. Our crew members have up to 28 years of experience, every eligible job gets permits pulled and inspections signed, and every completed job is covered by the written 90-Day Done Right Promise. We’re owner-operated, which means you deal with the same people who do the work. Our technicians know that a small failed part can cost you a lot if it’s ignored – in Miami Gardens, a bad gasket or a cracked frame isn’t just an inconvenience; it’s a slow leak waiting for the next storm.
Call (844) 797-8316 for a free estimate. A live person answers, and we’ll tell you exactly what’s failing, what it costs, and what we’d do if it were our own house.
Written by the team at Barrett & Sons Construction Miami Gardens, serving Miami Gardens and nearby areas.